Fully Laminated IPS LCD Screen for Sony PSP1000 PSP 1000 .With a Customized Replacement Top Cover. There Is No Logo On The Shell

The LCD screen cover of the original PSP1000 casing cannot be removed. To install the laminated LCD screen, you must purchase our customized dedicated cover.

Replacing the IPS screen requires short circuiting two points near the cable tray. There are four different motherboards.If there is no short circuit between those two welding points. The LCD screen display will be biased upwards and incomplete.

Brand new production. Not inventory goods.

Backlight is pure white without aging, IPS full view angle, low power consumption, and displays without ghosting.

The installation method is shown in the following figure.

Use a cross 2.0 screwdriver to unscrew these 5 screws

The cable tray is very fragile and prone to breakage. Pay attention to the direction and open it carefully.Replacing the IPS screen requires short circuiting two points near the cable tray. There are four different motherboards, as shown in the following picture.

Before short circuiting

After short circuiting. It can be directly connected with solder.

Due to the thinness of IPS LCD screens, a layer of adhesive pad must be placed between the LCD screen and the cable. This prevents the LCD screen from collapsing under the casing.

Just place the double-sided tape directly in the middle. Don't stick it.